User Manual

5-3
5
The information in this chapter is organized to reflect the structure of the web
management screens for easy reference.
The Configuration pages include the options in the table below. For details on
configuration for each feature, see the corresponding page number.
Note: The displayed pages and settings may differ depending on whether the unit is in
Router or AP Mode.
Table 5-1. Configuration Options
Menu Description Mode Page
Network Settings 5-4
Management IP Specifies an IP and subnet mask for management access AP 5-4
WAN Configures settings for the wide area network Router 5-5
LAN Sets the unit’s IP address and enables DNS Router 5-18
QoS Configures Quality of Service (QoS) for wireless traffic Router 5-19
Wireless Settings 5-21
Basic Setting Configures wireless transmission method, frequency and SSID Both 5-22
Advanced Setting Configures advanced wireless transmission values Both 5-24
WLAN Security Configures radio security parameters for the VAP interface Both 5-26
WLAN MAC ACL Configures MAC ACLs for the VAP interface Both 5-36
WPS Configures WPS settings Both 5-38
Routing 5-41
Static Route Configures IP settings for routing of traffic through the AP/
Router from another subnet
Router 5-41
Dynamic Route Enables RIP protocols for the LAN and WAN ports. Router 5-42
Multicast Routing Enables multicast routing. Router 5-43
Firewall 5-44
NAT Configures NAT settings Router 5-44
Packet Filter Configures WAN, LAN and MAC packet filtering Router 5-48
URL Filter Configures web site address filtering Router 5-50
Security Enables intrusion detection Router 5-51
Services 5-52
DHCP Configures the DHCP server settings Router 5-52
UPnP Enables UPnP Router 5-53
DDNS Configures Dynamic DNS settings Router 5-54
System Log Setting Enables system logs Both 5-55
Date/Time Configures NTP settings Both 5-57