User Manual

Advanced Setup
33
during inactivity. If the connection is inactive for longer than the
Maximum Idle Time, it will be dropped. (Default: 0)
Enable the Auto-reconnect option to automatically re-establish
the connection as soon as you attempt to access the Internet
again.
Click FINISH to complete the setup. (Refer to “Point-to-Point
Tunneling Protocol (PPTP)” on page 40 for details.)
Advanced Setup
Use the Web management interface to define system
parameters, manage and control the Wireless Barricade and its
ports, or monitor network conditions. The following table outlines
the selections available from this program.
Menu Description
System Sets the local time zone, the password for administrator access,
and the IP address of a PC that will be allowed to manage the
Wireless Barricade remotely.
WAN Specifies the Internet connection type:
• Dynamic IP host configuration and the physical MAC address
of each media interface
• PPPoE configuration
• PPTP
• Static IP and ISP gateway address
• BigPond (Internet service available in Australia)
• Specifies DNS servers to use for domain name resolution.
LAN Sets the TCP/IP configuration of the Wireless Barricade’s LAN
interface and all DHCP clients.
Wireless Configures the radio frequency, SSID, and encryption for
wireless communications.
NAT Shares a single ISP account with multiple users, sets up virtual
servers.