User's Manual
Table Of Contents
- Chapter 1: Introduction
- Chapter 2: Installation
- Chapter 3: Quick Setup
- Chapter 4: Configuration
- Appendix A: Troubleshooting
- Appendix B: Specifications
- Appendix C: Configuration File
- Appendix D: Using Partial Scan
- Appendix E: Registry Settings
Quick Setup
3-4
4. The PROFILE screen displays the new profile. Click the Confirm button to close
this Window.
Note: If your service provider supplies a defined profile in a file, use the Import button to
import the file instead of configuring the profile details manually.
Connecting to a WiMAX Service
When you have set up a profile, you are ready to connect to the service provider’s
WiMAX network.
Follow these steps:
1. Insert the PCMCIA card into the PC’s slot. The WinemaCM software starts
automatically.
Note: If WinemaCM does not start automatically, remove the card and reinsert it again.
If the problem continues, reinstall WinemaCM or contact your local service
support center.
2. From the WinemaCM main screen, click the Connect button.
(Note that this step is not necessary if the active proflie is set to Auto Connect.)
The new profile is set as the
active profile.
Click to close the window.