User's Manual
Table Of Contents
- Chapter 1: Introduction
- Chapter 2: Installation
- Chapter 3: Quick Setup
- Chapter 4: Configuration
- Appendix A: Troubleshooting
- Appendix B: Specifications
- Appendix C: Configuration File
- Appendix D: Using Partial Scan
- Appendix E: Registry Settings
The Profile Screen
4-5
The Profile Screen
From the WinemaCM main screen, click the PROFILE button to open the Profile
screen. This screen enables one or more connection profiles to be configured, one
of which is set as the “active” profile. Each profle can define different security
settings and connection options that can be applied for different service providers.
There is one default profile named “TLS” already configured.
The Profile screen is described below.
• The Profile List — The list of defined profiles. The four columns describe the
following properties of the profile:
• Activate: Indicates if the profile is set as the active profile to be used to connect
to the WiMAX service provider.
• Connect Mode: Indicates if the profile is set to connect automatically.
• Authentication: Indicates if some form of security has been configured for the
profile.
• Name: A descriptive name that identifies the profile in the list.
• Add (+) — Adds a new profile to the list.
• Modify (*) — Changes properties for the selected profile in the list.
• Delete (-) — Removes the selected profile from the list.
Click Add to define a new
profile.
A defined profile set as the
active profile to use for
connection to a WiMAX
service..
The Import and Export options
enable a configured list of
profiles to be imported from or
exported to a local file.