User's Manual
Table Of Contents
- Chapter 1: Introduction
- Chapter 2: Installation
- Chapter 3: Quick Setup
- Chapter 4: Configuration
- Appendix A: Troubleshooting
- Appendix B: Specifications
- Appendix C: Configuration File
- Appendix D: Using Partial Scan
- Appendix E: Registry Settings
Configuration
4-16
• Event Time — The time the error log entry ocurred.
• BSID — The identifier number of the WiMAX base station with which the subscriber
station is connected.
• Error Code — The error code number of the log entry.
• Search — Enables the user to search for specific log entries based on error code,
event ID, event time, or BSID. Select the search key from the pull-down list, specify
the log detail to search for, then click the Search button.
How to Modify the Error Log Password
The Error Log access password is specified in the Windows registry.
To change the Error Log access password in the Windows registry, follow these
steps:
1. From the Windows Start menu, select Run, then enter “regedit” to open the
Registry Editor.
2. Find the registry entry “HKEY_LOCAL_MACHINE\SOFTWARE\Intel
Corporation\WiMAX.”
3. Locate the entry “ErrPagePassword” and press Enter to edit the value.
Select ErrPagePassword and
press Enter to edit the value.