User's Manual
Table Of Contents
- Chapter 1: Introduction
- Chapter 2: Installation
- Chapter 3: Quick Setup
- Chapter 4: Configuration
- Appendix A: Troubleshooting
- Appendix B: Specifications
- Appendix C: Configuration File
- Appendix D: Using Partial Scan
- Appendix E: Registry Settings
WinemaCM Error IDs
A-3
2. When the uninstall is complete, click Finish to exit.
WinemaCM Error IDs
The WinemaCM software records error numbers in a log when certain conditions are
encountered. From the Status screen you can access the Error Logs by entering a
password. The error ID numbers can help the WiMAX service provider troubleshoot
problems.
The WinemaCM error IDs are listed here for reference. Be sure to take note of
displayed error numbers when contacting your service provider for assistance.
WinemaCM Error IDs
Error ID Cause Description
0x11000 Sync failure MS cannot find the BS. Or there are no valid
maps or DCD/UCD from the BS.
0x11001 Ranging failure Ranging procedure with the BS failed.
0x11003 Authentication failure Security authentication failed by supplicant.
0x11004 SBC failure Basic capability negotiation with the BS failed.
0x11005 PKM failure Security authentication failed.
0x11006 Registration failure Registration with the BS failed.
0x13002 Timeout No response from Beceem after timer has timed
out.
0x14000 Signal low The RSSI is smaller than MIN_RSSI_DBM.
0x18000 Wrong password The wrong password has been entered.