User Manual

D RIVER AND U TILITY I NSTALLATION
10
2. Insert the SMC2602W Driver, Utility, and Documentation CD into
the CD-ROM drive, specify the location as:
a) “D:\SMC2602W\WIN9X” or b) “D:\SMC2602W\WIN2K” or
c) “D:\SMC2602W\WINME” (assuming D: is the location of your
CD-ROM drive), and click “OK” to copy files from the CD-ROM.
3. The system should find the drivers. Click “Next” button to continue
the installation. The wizard will show “SMC2602W 11Mbps Wireless
PCI Card” on screen.
Note: If the system could not find the drivers, click “Back” button,
and select “Display a list of all the drivers...” option. Select
“Network Adapters” from the list of devices, then press “Have
Disk” and once again browse to the location of the drivers.
4. Once the system has copied the SMC drivers from the CD, the driver
install process will be complete. Click “Finish” to exit the wizard.
5. You will then be prompted to reboot the machine. Press “Yes” button.
Upon reboot, the EZ Connect SMC2602W 2.4 GHz 11 Mbps
Wireless PCI Card will be initialized and ready for use.