Quick Installation Guide

Using Monitor Utility
13
Create Keys Manually — This selection allows you to manually enter key elements.
Notes: 1. Selecting the Alphanumeric radio button allows you to enter 5
alphanumeric characters for 64-bit encryption, or 26 alphanumeric
characters for 128-bit encryption for each of the 4 keys.
2. If you select the Hexadecimal radio button, you must enter 10 or 26
hexadecimal numbers (0~9, A~F, e.g., D7 0A 9C 7F E5) respectively
for 64- and 128-bit encryption.
Use WEP Key — Choose the Key ID that has the encryption string you prefer. If you
are using a key generated from the passphrase, you must use the same passphrase
and key on each station.
Create Keys with Passphrase — Security keys for WEP encryption are generated
from a passphrase string, so you must use the same passphrase on all the stations
in your network.
About
This screen displays the information of Network Driver, Configuration Utility, and NIC
Firmware Version.
wn3306-ZZ.book Page 13 Friday, April 18, 2003 3:55 PM