Quick Installation Guide

Wireless PC Card
16
Advanced Settings
Click the General tab (see the previous screen), and make sure that the adapter shown is
the Wireless LAN Card.
1. Click Configure and then click the Advanced tab.
2. Set the Fragmentation Threshold. (The default 2,346 means Disabled)
3. Preamble Type offers a drop-down list with three options: Auto, Long, or Short. If you
are not sure whether all the clients and access points in your wireless network
support the Short RF preamble, then leave this setting on Auto (Default).
4. Rate is the data transmission/reception rate setting. It can be set to Auto, 1 Mbps,
2 Mbps, 5.5 Mbps, 11 Mbps. Usually this should be set to Auto. In a radio
frequency hostile environment, a lower rate can provide more stable transmission
quality.
5. Set the RTS Threshold to the same as that used by other devices in your network.
(The default 2,347 means Disabled)
wn3306-ZZ.book Page 16 Friday, April 18, 2003 3:55 PM