User Manual

42 Chapter 3 Network Configuration
214695-A
[Final Draft—Nortel Confidential]
Figure 44 Mobile Adapter 2201 Client Manager - Station Configuration tab
Default Settings Windows XP Zero-Configuration
You may also choose the default parameters and directly proceed to Windows XP
zero-configuration through the steps below:
1 Go to “Control Panel” and open “Network Connections.”
2 Right-click the Wireless Network Connection of “802.11a/b Plus Cardbus,”
and make sure this connection is Enabled.
3 Right-click the Wireless Network Connection of “802.11a/b Plus Cardbus,”
and then click “Properties.”
4 Select “Wireless Networks” tab and select “Use Windows to configure my
wireless network settings” check box.
Note: Clear the check box of “Use Windows to configure my wireless
network settings” will disable automatic wireless network configuration.