User Manual

C HAPTER 5 | AP Mode Configuration
AP Mode Utility Configuration
– 35 –
◆ Pre-shared Key – Enter a key as an easy-to-remember form of letters
and numbers. The key must be from 8 to 32 characters, which can
include spaces. All wireless clients must be configured with the same
key to communicate with the access point.
◆ WEP Key – Only available when WEP encryption is selected. Standard
keys are either 5 or 13 alphanumeric characters; or 10 or 32
hexadecimal digits. Check the Show Password box to display password
characters as you type instead of asterisks.
Click Apply to confirm the configuration settings.
ACCESS CONTROL The access control page allows you to restrict the MAC addresses of clients
wanting to connect with the AP.
Figure 27: Access Control
The displayed items on this page can be described as follows:
◆ Access Policy — Select a policy for access control. (Default: Disable)
■
Disable – Disable the feature.
■
Allow All – Allow the access for the listed MAC addresses.
■
Reject All – Deny the access for the listed MAC addresses.
◆ Type MAC Address — Input the MAC address of a wireless client.
◆ Add — Click to add the MAC address to the Access List.
◆ Delete — Click to delete a MAC address from the list.
◆ Remove All — Click to delete all the MAC addresses from the list.