User Manual
Table Of Contents
- Chapter 1: Introduction
- Chapter 2: Installing the OD200
- Chapter 3: Initial Configuration
- Chapter 4: System Settings
- Chapter 5: Gateway Configuration
- Chapter 6: WiMAX Settings
- Chapter 7: VoIP Settings
- Chapter 8: Wi-Fi Settings
- Appendix A: Troubleshooting
- Appendix B: Specifications
- Appendix C: Cables and Pinouts
- Appendix D: License Information
- Glossary
- Index
WAN Settings
5-3
5
Dynamic IP Address
For dynamic IP assignment from the service provider, the unit functions as a
Dynamic Host Configuration Protocol (DHCP) client. When enabled, no other
settings are required.
Figure 5-2 Dynamic IP Address
Static IP Settings
Selecting Static IP Address for the WAN type enables you to enter static IP settings
as assigned by the service provider.
Figure 5-3 Static IP Settings
IP Address assigned by your ISP – The IP address provided by your service
provider. Valid IP addresses consist of four decimal numbers, 0 to 255, separated by
periods.
Subnet Mask – Indicates the subnet mask, such as 255.255.255.0.
Gateway – The gateway IP address provided by your service provider.