User Manual
Table Of Contents
- Chapter 1: Introduction
- Chapter 2: Installing the OD200
- Chapter 3: Initial Configuration
- Chapter 4: System Settings
- Chapter 5: Gateway Configuration
- Chapter 6: WiMAX Settings
- Chapter 7: VoIP Settings
- Chapter 8: Wi-Fi Settings
- Appendix A: Troubleshooting
- Appendix B: Specifications
- Appendix C: Cables and Pinouts
- Appendix D: License Information
- Glossary
- Index
Gateway Configuration
5-10
5
The more common TCP service port numbers include: HTTP: 80, FTP: 21, Telnet:
23, and POP3: 110.
Figure 5-10 Virtual Server
Private IP – The IP address of the server on the local Ethernet network. The
specified address must be in the same subnet as the OD200 and its DHCP server
address pool. (Range: 192.168.1.1 to 192.168.1.254)
Private Port – Specifies the TCP/UDP port number used on the local server for the
service. (Range: 0-65535)
Type – Specifies the port type. (Options: TCP or UDP; Default: TCP)
Public Port – Specifies the public TCP/UDP port used for the service on the WAN
interface. (Range: 0-65535)
Enabled – Enables the virtual server mapping on the specified ports.
(Default: Disabled)