User Manual

WiMAX Settings
6-4
6
EAP Mode – Selects if only a specific user is to be authenticated (user-only), the
subscriber device itself (device-only), or both a user and the device (user-device).
Select the option instructed by the WiMAX service operator.
User Name – The user name required for EAP-TTLS authentication.
(Default: pseudo@realm)
Password – The user password required for EAP-TTLS authentication.
(Default: hello)
MAC Address@domain – A text string that is used to identify the authentication
realm for device authentication. This identity is used to proxy an authentication
request to another remote server. The authentication is then performed using the
unique X.509 authentication certificate included with the device firmware. The
identitiy string consists of either the device MAC address (for EAP-TLS) or a random
generated number (for EAP-TTLS), together with an operator-specified domain
name. For example; 1f:20:30:10:4d:50@service-telecom.
Subscriber Station Information
The SSInfo page displays information about the software versions on the OD200
unit.
Figure 6-5 Subscriber Station Information
Firmware Version – The version of software code running on the unit.
Driver Version – The version of the WiMAX chip driver software.
Library Version – The version of WiMAX library software.
Baseband Chip Version – The version of the WiMAX baseband chip.
RF Chip Version – The version of the WiMAX radio chip.