User Manual

Wi-Fi Settings
8-2
8
Figure 8-1. Wireless Settings
Interface Status – Enables the Wi-Fi radio.
Country Code – The country code restricts operation of the Wi-Fi radio to the
channels and transmit power levels permitted for Wi-Fi networks in the specified
region. You must set the correct Country Code to be sure the radio conforms to local
regulations. (Options: United States, Japan, Europe; Default: United States)
Note to US Model Owner: To comply with US FCC regulation, the country
selection function has been completely removed from all US models. The
above function is for non-US models only.
The availability of some specific channels and/or operational frequency
bands are country dependent and are firmware programmed at the factory to
match the intended destination. The firmware setting is not accessible by the
end user.
Network Name (SSID) – The Service Set ID (SSID) that identifies the Wi-Fi
network. The SSID is case sensitive and can consist of up to 32 alphanumeric
characters. (Default: default)
Radio Channel – The radio channel used by the unit and its clients to communicate
with each other. This channel must be the same on the unit and all of its wireless
clients. The available channel settings are limited by local regulations. (Default: 1;
Range: 1-11)