User Manual
Table Of Contents
- Chapter 1: Introduction
- Chapter 2: Installing the OD200
- Chapter 3: Initial Configuration
- Chapter 4: System Settings
- Chapter 5: Gateway Configuration
- Chapter 6: WiMAX Settings
- Chapter 7: VoIP Settings
- Chapter 8: Wi-Fi Settings
- Appendix A: Troubleshooting
- Appendix B: Specifications
- Appendix C: Cables and Pinouts
- Appendix D: License Information
- Glossary
- Index
MAC Authentication
8-9
8
Figure 8-6. MAC Authentication
System Default – Specifies the action for MAC addresses listed in the local MAC
Authentication Table.
• Deny: Blocks access for all MAC addresses listed in the MAC Authentication
Table. Clients with MAC addresses not listed in the table are permitted access.
• Allow: Permits access for all MAC addresses listed in the MAC Authentication
Table. Clients with MAC addresses not listed in the table are denied access.
Local MAC Filter Settings – Adds new MAC addresses to the MAC Authentication
Table, or removes addresses currently listed in the table.
• MAC Address: Physical address of a client. Enter six pairs of hexadecimal digits
separated by colons; for example, 00:90:D1:12:AB:89.
• Permission: Select Add to list a new specified MAC address in the MAC
Authentication Table. Select Delete to remove the specified MAC address from the
table.
• Update: Performs the Add or Delete action on the specified MAC address.
MAC Authentication Table – Displays current entries in the MAC filter database.