User's Manual

C HAPTER 1 | Introduction
RG231 Hardware Description
– 15 –
POWER STATUS LED The RG231 includes a Power LED indicator that simplifies installation and
WiMAX network troubleshooting. The LED, which is located on the front
panel, is described in the following table.
Figure 2: RG231 LED Indicators
WI-FI STATUS LED The models that support Wi-Fi operation include a Wi-Fi LED indicator that
displays the Wi-FI network status. The LED, which is located on the front
panel, is described in the following table.
Table 1: Power Status LED
Status Description
On Green The unit has completed entry to a WiMAX network.
On Amber Indicates one of the following conditions:
◆ After power on, indicates the unit is running its self test.
◆ Indicates that the network entry process is in progress or has
restarted.
Blinking Amber When blinking with three of the WiMAX signal LEDs turned on, indicates
authentication has failed.
On Red A system failure has occured.
Off No power is being supplied to the unit.
Power Status LED
Wi-Fi Status LED
WiMAX Signal LEDs
WPS Status LED
Table 2: Wi-Fi Status LED
Status Description
On Green The Wi-Fi radio is enabled and operating normally.
Flashing Green Indicates data traffic in the Wi-Fi network.
Off There is no Wi-Fi connection or the radio is disabled.