User's Manual

– 22 –
3 INITIAL CONFIGURATION
The RG231 initial configuration steps can be made through its web
management interface using the Setup Wizard. It is recommended to make
the initial changes by connecting a PC directly to one of the RG231’s LAN
ports.
ACCESSING THE WEB MANAGEMENT INTERFACE
The RG231 has a default IP address of 192.168.1.1 and a subnet mask of
255.255.255.0. If your PC is set to have an IP address assigned by DHCP
(Dynamic Host Configuration Protocol), you can connect immediately to the
web management interface. Otherwise, you must first check if your PC’s IP
address is set on the same subnet as the RG231 (that is, the PC’s IP
address starts 192.168.1.x).
In the web browser’s address bar, type the default IP address: http://
192.168.1.1.
The web browser displays the RG231’s login page.
Figure 7: Login Page
Language – Selects English or Traditional Chinese as the web interface
language.
Logging In – Type the default User Name “admin” and Password “admin,”
then click Login. The home page displays.