User's Manual

HAPTER

| System Settings

System Log

– 36 –

◆ Sync with host – Sets the unit’s time from the web management PC’s

system time.

◆ Current Date (yyyy:mm:dd) – The current date of the system clock.

◆ New Date (yyyy:mm:dd) – Sets the system clock date.

◆ Set Time Zone – SNTP uses Coordinated Universal Time (or UTC,

formerly Greenwich Mean Time, or GMT) based on the time at the

Earth’s prime meridian, zero degrees longitude. To display a time

corresponding to your local time, you must select your time zone from

the pull-down list.

SYSTEM LOG

The RG300 supports a logging process that controls error messages saved

to memory. The logged messages serve as a valuable tool for isolating

device and network problems. The System Log page displays the latest

messages logged in chronological order, from the oldest to the newest. Log

messages saved in the unit’s memory are erased when the device is

rebooted.

Figure 21: System Log

The following items are displayed on this page:

◆ Refresh — Sends a request to add the latest entries to the System Log

Table.

◆ Download — Downloads the current system log messages to a file on

the web management station.

◆ Clean — Removes all the current system log messages from the

System Log Table.

◆ System Log Level — Sets the minimum severity level for event

logging. The system allows you to limit the messages that are logged