User's Manual

HAPTER

| WAN Configuration

WAN Settings

– 41 –

◆ Netmask – Indicates the subnet mask, such as 255.255.255.0.

◆ Gateway – The gateway IP address provided by your service provider.

◆ Configured DSCP (Differentiated Services Code Point) – Sets the

default DSCP priority for all egress packets not classified by other rules.

L2TP SETTINGS If your service provider supports Layer 2 Tunneling Protocol (L2TP) for your

Internet connection, configure the settings described below.

Figure 26: L2TP Settings

The following parameters are displayed in this section on this page:

◆ Enable – Enables the L2TP settings.

◆ Server IP – The IP address of the L2TP server, as specified by the

service provider.

◆ Username – Enter your user name for connecting to the L2TP service,

as supplied by the service provider. (Range: 1-20 characters)

◆ Password – Specify the password for your connection, as supplied by

the service provider. (Range: 1-20 characters)

PPTP SETTINGS If your service provider supports Point-to-Point Tunneling Protocol (PPTP)

for your Internet connection, configure the settings described below.

Figure 27: PPTP Settings

The following parameters are displayed in this section on this page:

◆ Enable – Enables the PPTP settings.