User's Manual

HAPTER

| VoIP Settings

Call Feature

– 68 –

CALL FEATURE

The RG300 allows you to configure several call features, such as call

waiting and call-forwarding. Other call features can be implemented by

pressing specific phone buttons or entering dial patterns.

OTE

Some call features may be dependent on support at the SIP server.

Check with the SIP service provider.

Figure 50: Call Features

The following items are displayed on this page:

◆ Call Waiting — Enables a call waiting alert. If during a call there is

another incoming call, an alert tone is heard. You can place the active

call on hold (press the “Flash” or “Flash Hook” button on the phone)

and switch to the incoming call.

◆ Call Transfer — Transfers any received call to another number you

specify.

■

Blind Transfer — During a call press the “Flash” button, which

puts the caller on hold, then enter the transfer key sequence (as

defined on the Dial Plan page; default “*#”). You can then dial the

transfer number. The call is transfered immediately and you can

hang up. The transfered call shows the caller ID of the original

calling party and not your caller ID.