User's Manual

C HAPTER 12 | Wi-Fi Settings
ACL Settings
– 81 –
ACL SETTINGS
Wireless clients can be authenticated for network access by checking their
MAC address against a local database configured on the RG300. You can
configure a list of up to 32 wireless client MAC addresses in the filter list to
allow network access.
Figure 58: ACL Settings
The following items are displayed on this page:
◆ Enable — Enables the ACL feature.
◆ MAC Address — Physical address of a client. Enter six pairs of
hexadecimal digits separated by colons; for example,
00:90:D1:12:AB:89.
◆ Add — Click to list a new specified MAC address in the MAC
Authentication Table.
◆ Operation — Click the Remove button to delete the specified MAC
address from the table.