User's Manual

C HAPTER 14 | VLAN Settings
VLAN Settings
– 85 –
VLAN SETTINGS
From the VLAN Settings page, you can assign ports to a VLAN group. When
a device connects to the network, it automatically assumes the VLAN of the
port. If the user changes ports and needs access to the same VLAN, the
user must manually make a port-to-VLAN assignment for the new
connection.
Figure 60: VLAN Settings
The following parameters are displayed on this page:
◆ Enable — Enables the VLAN settings on the Gateway.
◆ Group (0~3) — Defines four port-based VLAN groups. Note that a
host in one VLAN group cannot communicate with a host in another
group.
◆ P1~P4 — Identifies LAN Port 1, Port 2, Port 3 and Port 4