User's Manual

Setting Profiles
4-5
Operator Restriction — When set to “Home Operator,” the user can only connect
to the service provider specified in the profile. When set to “No Operator Restriction,”
the operator specified in the profile is used when the network is detected, otherwise
the user can roam to other networks.
Connection Mode — When set to “Auto Connection” the utility will use the profile
settings to automatically scan and connect to a WiMAX network.
Power Save Mode — To save power, the card can operate in one of three modes:
• High: The card will go to sleep and idle whenever it can.
• Medium: The card will go to sleep and idle only after a predefined time.
• Application Optimized: The card will go to sleep and idle only when the PC
operating system allows it.
Save as Default Profile — Saves the profiles settings and sets it as the default.
Clicking the Scan tab on the Add Profile screen displays the profile frequency and
bandwidth settings.
Figure 4-6. Add Profile Screen - Scan Tab
The Scan tab on the Add Profile screen displays the following items:
Frequency — Specifies a center frequency to scan.
Bandwidth — Specifies the bandwidth of the channel; 5, 7, 8.75, or 10 MHz.