User's Manual
Table Of Contents
- Chapter 1: Introduction
- Chapter 2: Installation
- Chapter 3: Configuration
- Chapter 4: Administrator Mode
- Appendix A: Troubleshooting
- Appendix B: Specifications
- Glossary
- Index
2-1
Chapter 2: Installation
The CD-ROM that comes with the package contains the WiMAX CardBus Card
driver and configuration software.
Caution: The WiMAX CardBus Card requires the Microsoft .NET Framework
Version 2.0 (or higher) to be installed on the host computer. If the system
does not have the .NET Framework 2.0 already installed, you must
download the software from Microsoft and install it before starting
installation.
To install the WiMAX CardBus Card driver and software utility for Windows XP or
WIndows Vista, follow these steps:
1. Turn on your notebook and wait until the Windows system has completely
started.
2. Insert the card into an available CardBus slot. When the card is inserted
correctly, its green LED turns on (see page 1-3).
When you first insert the card in a slot, the Windows “Found New Hardware”
dialog box displays. Just click Cancel.
3. Load the driver and utility CD that comes with the package. The “InstallShield
Wizard” program should start automatically.
If the install program does not start automatically, open the folder that displays
the CD’s contents and find the file “Setup.exe” in the root directory. Double click
the file to start the install program.
Figure 2-1. InstallShield Wizard Start