User's Manual
Table Of Contents
- Chapter 1: Introduction
- Chapter 2: Installation
- Chapter 3: Configuration
- Chapter 4: Administrator Mode
- Appendix A: Troubleshooting
- Appendix B: Specifications
- Glossary
- Index
Configuration
3-4
Connection Management
The WCM Connect/Disconnect screen displays information about the wireless link
to the service provider network.
Figure 3-6. Connect/Disconnect Screen
The displayed items on this screen can be described as follows:
Profile Name — Name of a user account profile that defines a WiMAX network
connection. When a profile is set to “Auto Connection” (see “Editing a Profile” on
page 3-7), the Profile Name cannot be changed and the utility automatically scans
and connects to the WiMAX network defined by the default profile.
Connect/Disconnect — Manually connects or disconnects to the WiMAX service
as defined in the selected profile. When a profile is set to “Auto Connection” (see
“Editing a Profile” on page 3-7), the Connect button is disabled and the utility
automatically scans and connects to the WiMAX network defined by the default
profile.
Card Status — Indicates if the card is plugged into a slot on the host PC and is
active or powered off.
Connection — Indicates the current status of the WiMAX network connection.
Signal Strength — An image that shows the current receive signal strength
indicator (RSSI) of the received WiMAX radio signal.