User's Manual

C HAPTER 1 | Wi-Fi Settings
ACL Settings
– 17 –
Figure 7: Security Mode - 802.1X
The following items are displayed in this section on this page:
◆ Auth Mode — Configures the 802.1X security mode used by clients.
When using 802.1X, either with WPA/WPA2 or on its own, be sure there
is a configured RADIUS server in the connected wired network.
(Default: Disable)
◆ RADIUS Server — Specifies the IP address of the RADIUS server.
◆ RADIUS Port — The User Datagram Protocol (UDP) port number used
by the RADIUS server for authentication messages. (Range: 1024-
65535; Default: 1812)
◆ RADIUS Key — A shared text string used to encrypt messages
between the access point and the RADIUS server. Be sure that the
same text string is specified on the RADIUS server. Do not use blank
spaces in the string. (Maximum length: 20 characters)
ACL SETTINGS
Wireless clients can be authenticated for network access by checking their
MAC address against a local database configured on the RG231. You can
configure a list of up to 32 wireless client MAC addresses in the filter list to
allow network access.
Figure 8: ACL Settings