User Manual
Table Of Contents
- Chapter 1: Introduction
- Chapter 2: Installation
- Chapter 3: Network Planning
- Chapter 4: Initial Configuration
- Chapter 5: System Configuration
- Appendix A: Troubleshooting
- Appendix B: Specifications
- Appendix C: License Information
- Glossary
- Index
System Configuration
5-38
5
Figure 5-24. WPS Settings
WPS Settings — Enables WPS, locks security settings, and refreshes WPS
configuration information.
• WPS Config – Enables WPS. (Default: Disable)
WPS Summary – Provides detailed WPS statistical information.
• WPS Current Status – Displays if there is currently any WPS traffic connecting to
the wireless AP/Router. (Options: Start WSC Process; Idle; Default: Idle)
• WPS Configured – States if WPS for wireless clients has been configured for this
device. (Default: no)
• WPS SSID – The service set identifier for WLAN1. (Default: WBR14S_N3_AP)
• WPS Auth Mode – The method of authentication used. (Default: Open)
• WPS Encryp Type – The encryption type used for WLAN1. (Default: None)
• WPS Default Key Index – Displays the WEP default key (1~4).
• WPS Key (ASCII) – Displays the WPS security key (ASCII) which can be used to
ensure the security of the wireless network.
•AP PIN – Displays the PIN Code for the wireless AP/Router. The default is
exclusive for each unit. (Default: 31667845)