Operation Manual
Setting Group Information in Population Management
You can use the
Set Group Information dialog box to set Patient Profile information for all group members. For
example, you can set the bG target range and health record targets for all group members. The
changes the Patient Profile information of each group member.
Note:
This feature will work only for the current group members at the time the changes are confirmed. New
members' profiles are not automatically updated unless you apply this action after they are added to the group.
Follow these steps to change Patient Profile information once for all group members:
1.
Be sure you want to change this information for all group members because this action cannot be reversed.
2.
Click Population Management
on the
Main Menu
window to open the
Select Group dialog box.
3.
Select the group that you want and click
OPEN
in the
Select Group
dialog box. The
Population
Management
window opens.
4.
In the
Population Management—Group Summary
window, click
Edit Patient Profile and apply changes
to all members
at the bottom of the screen to open the
Set Group Information dialog box.
5.
Select the type of information that you want to edit from the following options:
Targets and Events
,
Day and
Week
,
Healthcare Providers
,
Insurance
, or
Education. Click OK
.
6.
Make the appropriate changes in the resulting dialog box, and click
OK
.
Note:
On some dialog boxes you will need to first select the check box next to the information you want to
apply to all group members.
7.
In the warning box that opens, you have two ways to proceed:
❍ Click Yes
to accept the changes. The warning box closes, and the changes are applied to all group
members.
❍ Click No
to cancel. The warning box closes without applying changes.
Related Links
Learn About the Population Management Window
Set Group Information Dialog Box
Population Management
( v1.1 )
Setting Group Information in Population Management
Version: 1.0
222