Technical data

74
Testing blood glucose
75
Testing blood glucose
4
4.2.2 Docking the finger pricker onto the meter

Hold the meter so it is horizontal, with the recess for docking the fin-
ger pricker pointing upwards.
 Place the flat face of the finger pricker on the lower end of the
recess, with the plunger facing towards the slide button.
 Slide the finger pricker forward along the meter in the direction indi-
cated by the arrow, until it locks with an audible CLICK. The guides
along the inside of the recess must engage with the grooves along
the finger pricker.
4.2.3 Inserting the lancet

Remove the cap from the finger pricker.
 Slide a new lancet into the lancet holder, and push it in until you
hear it CLICK into place.