Instruction manual

6
Accu-Chek Performa
• Place the meter approximately 10cm away from the
infrared window on the Accu-Chek Smart Pix
• Switch the meter on by pressing the ‘right’ and ‘left’
buttons at the same time. The window will show 2
arrows and data starts transferring automatically.
• Once data transfer is complete, the report will show
on screen.
Accu-Chek Integra
• Place the meter approximately 10cm away from the
infrared window on the Accu-Chek Smart Pix.
• Switch the meter on by pressing the SET and MEMO
buttons at the same time. The display will show 2
arrows and data starts transferring automatically.
• Once data transfer is complete, the report will show
on screen.
Accu-Chek Go
(Accu-Chek Active)
• Place the meter approximately 10cm away from the
infrared window on the Accu-Chek Smart Pix.
• Switch the meter on by keeping the M button
pressed for more than 3 seconds. The display shows
PC and data starts transferring automatically.
• Once data transfer is complete, the report will show
on screen.
Accu-Chek Go (New)
• Place the meter approximately 10cm away from the
infrared window on the Accu-Chek Smart Pix.
• With the meter turned off, briefly press the on/off
button and left hand buttons at the same time.
• Once data transfer is complete, the report will show
on screen.
Downloading results from the Accu-Chek meter/insulin
pump to Accu-Chek Smart Pix