User`s manual

Farbe: PMS 583 – Prüfmittelnummer: 208

2.3 Inserting or replacing batteries

When you replace the batteries, your stored results are retained

in memory. However, you will need to re-enter the time and

date. If you fail to do so, any blood glucose test results you

obtain from this point forward will be displayed and saved

without time and date. In this case, the test results saved in

memory will be numbered consecutively so you can still see the

order in which you took the readings.

Never throw batteries into a fire. This is dangerous because

they may explode.

Remove the batteries if your Accu-Chek Integra meter is to

remain unused for some time.

Think of the environment. Dispose of used batteries sensibly.

2.4 Performing a full display test

To check that all of the display elements are functioning correctly, you

should carry out a full display test.

 If the meter is on, turn it off.

 Press and hold down the MEMO button.

The meter turns on. “On” appears briefly in the display. While you hold

down the MEMO button, all of the display elements are visible. Compare

the display screen of your meter with the one shown below.

MEMO button Full display test

If any of the display elements are missing or the unit shown for the

blood glucose results is not the correct one, please contact Customer

Support (see Chapter 19 for details) to exchange the meter.

CTRL

MEM

mmol/L