User`s manual

Farbe: PMS 583 – Prüfmittelnummer: 208

3.4 Setting the time

 Check the meter is off.

 Press the SET button.

The meter turns on without advancing a test strip from the drum.

 Press the SET button repeatedly until the

hour field flashes.



 Press the MEMO button repeatedly to set

the hour.

24-hour format: If you hold the MEMO button down, the meter

fast-scrolls forward to 23 and then begins again at 0.

12-hour format: If you hold the MEMO button down, the meter

fast-scrolls forward to 12 p.m. and then to 12 a.m.

 Press the SET button again.

The minute field flashes.



 Press the MEMO button repeatedly to set the

minute.

If you hold the MEMO button down, the meter fast-scrolls forward to 59

and then begins again at 0.

If you wish to set the date, leave the meter turned on and proceed to the

next section, 3.5.

If not, press the ON/OFF button to turn the meter off. The current

settings will be saved automatically.

At temperatures below –10°C the batteries do not have enough

power to keep the internal clock functioning. In this event the

clock must be reset.