User`s manual

64
Farbe: PMS 583 – Prüfmittelnummer: 208
65
5.4 Downloading data to a PC or handheld computer
 Press the SET button and MEMO button at the
same time.
The meter turns on without advancing a test strip
from the drum. Two arrows appear in the display.
The meter automatically downloads all stored blood
glucose test results to your computer. The two arrows
flash in the display during the download.
Once downloading has finished, the meter turns off automatically.
A message is displayed on the computer indicating that the data
transfer is complete. The computer turns the Accu-Chek Integra
meter off.
i
If data transfer did not occur or was incomplete, the two arrows
do not start to flash and the meter turns off automatically after
5 minutes. Please refer to Chapter 9 “Display messages and
troubleshooting”.
6 Checking the Accu-Chek Integra meter
6.1 Quality control checking with Accu-Chek Integra
control solution
To ensure your results are always dependable, you must periodically
check the performance of your Accu-Chek Integra meter.
Do this by running a quality control check using Accu-Chek Integra
Control solution (not supplied with the meter):
 when you open a new pack of test strip drums
 after you have replaced the batteries
 if your meter flashes “CTRL”, indicating that a quality control test is
required
 after you have cleaned your meter
 if your result does not agree with how you feel
Please contact your local customer support and service centre for de
-
tails of where you can obtain Accu-Chek Integra Control solution (see
Chapter 19 for details).