User`s manual

Farbe: PMS 583 – Prüfmittelnummer: 208

9 Display messages and troubleshooting

When you use your Accu-Chek Integra meter, various letters and sym-

bols will appear on the display and also at times error messages. Some

of the routine display messages have already been explained. Following

is a complete list of display messages, what they mean, and what action

you should take in case you see an error message.

Please watch out for any messages displayed when you use the meter.

Every message provides you with important information. Therefore, if

you do not recognize a symbol or do not understand a message, please

refer immediately to this chapter for an explanation. Otherwise you run

the risk of misinterpreting your blood glucose results.

Please note:

Several messages may be displayed simultaneously. For example, in

this display the blood glucose result and time are not flashing while

date, test strip symbol, thermometer symbol, drum symbol and “CTRL”

are flashing.

This means that the temperature during testing was at the limits of the

permitted range, the 90-day use-by period for the test strip drum has

expired and the test strip is still in the meter.

9.1 Messages and symbols

When symbols and numbers are surrounded by a halo, it indicates that

they are flashing in the meter’s display.

This message/

symbol appears ...

and means:

mmol/L

This is a pre-programmed unit displayed with the

blood glucose result. (See Chapter 2.2)

The beep tone is turned on.

A test strip is being advanced or is still in the

meter.

You may apply blood or control solution to the

test strip now.

CTRL

mmol/L