Datasheet

ManualsBrandsAccu-Tech Manualscomputer cables006K88-31130-29

Corning Cable Systems MIC

Plenum Cables are de-

signed for use in plenum, riser and general purpose

environments for intrabuilding backbone and horizontal

installations. These multi -fiber cables use 900 μm TBII

Buffered Fibers to allow easy, consistent stripping and

to facilitate termination. The fibers are surrounded by

dielectric strength members and protected by a flame -

retardant outer jacket.

The all -dielectric cable construction requires no ground-

ing or bonding. MIC Plenum cables are ideal for routing

inside buildings, within plenum areas and riser shafts,

to the telecommunications rooms and workstations. The

MIC Plenum Cables meet the application requirements of

the National Electrical Code

(NEC

) Article 770 and are

OFNP and FT -6 listed.

Features and Benefits

900 µm TBII

Buffered Fibers

Easy, consistent stripping

All-dielectric construction

Requires no grounding or bonding

Flame-retardant jacket

Rugged and durable

Standards

Approval and Listings National Electrical Code

(NEC) OFNP, CSA FT-6,

ICEA S-83-596

Flame Resistance NFPA 262 (for plenum, riser

and general building appli-

cations)

26.61

115 0

Part Number: 004K88-31130-29

Cross Section of Part Number: 004K88-31130-29

MIC

Tight-Buffered Cable, Plenum

4 F, 62.5 µm multimode (OM1)

Specification Sheets 004K88-31130-29_NAFTA_AEN

Page 1 | Revision date 2011-07-14

Flame-Retardant

Outer Jacket

Dielectric Strength

Members

Tight-Buffered

Fiber

Summary of content (3 pages)

PAGE 1
MIC® Tight-Buffered Cable, Plenum 4 F, 62.5 µm multimode (OM1) Corning Cable Systems MIC® Plenum Cables are designed for use in plenum, riser and general purpose environments for intrabuilding backbone and horizontal installations. These multi-fiber cables use 900 μm TBII® Buffered Fibers to allow easy, consistent stripping and to facilitate termination. The fibers are surrounded by dielectric strength members and protected by a flameretardant outer jacket.
PAGE 2
MIC® Tight-Buffered Cable, Plenum 4 F, 62.5 µm multimode (OM1) Specifications General Specifications Environment Indoor Application General Purpose Horizontal, Vertical Riser, Plenum Cable Type Tight-Buffered Product Type Distribution Flame Rating Plenum (OFNP) Fiber Category 62.
PAGE 3
MIC® Tight-Buffered Cable, Plenum 4 F, 62.5 µm multimode (OM1) Mechanical Characteristics Cable Max. Tensile Strengths, Short-Term 440 N (100 lbf) Max. Tensile Strengths, Long-Term 132 N (30 lbf) Nominal Outer Diameter 5.3 mm (0.21 in ) Weight 25 kg/km (17 lb/1000 ft) Min. Bend Radius Installation 80 mm (3.2 in) Min. Bend Radius Operation 27 mm (1.1 in) Fiber Specifications Optical Characteristics (cabled) Fiber Core Diameter 62.