Reach-in Refrigerators and Freezers Models: Solid Door Refrigerators ARS23ML ARS49ML MLR23S MLR49S SCRR232 SCRR492 Glass Door Refrigerators ARG23ML ARG49ML MLR23G MLR49G SCR23SSG SCR49SSG Solid Door Freezers AFS23ML AFS49ML MLF23S MLF49S SCFF237 SCFF497 Installation & Instruction Manual BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING INSTRUCTIONS. Felix Storch, Inc. An ISO 9001:2015 registered company 770 Garrison Avenue Bronx, NY 10474 www.summitappliance.
TABLE OF CONTENTS Important Safeguards .............................................................. 3 – 5 Installation ...................................................................................... 6 Maintenance & Cleaning ......................................................... 6 – 7 Alarm Function for Cleaning Condenser ................................. 7 Operation ................................................................................ 7 – 11 Basic Operation ...........................
IMPORTANT SAFEGUARDS Before the appliance is used, it must be properly positioned and installed as described in this manual, so read the manual carefully. To reduce the risk of fire, electrical shock or injury when using the appliance, follow basic precautions, including the following: Plug into a grounded 3-prong outlet, do not remove grounding prong, do not use an adapter, and do not use an extension cord. Do not connect grounding wire to a gas or water pipe.
DANGER - Risk of fire or explosion. Flammable refrigerant used. • Do not use mechanical devices to defrost refrigerator. Do not puncture refrigerant tubing. • To be repaired only by trained service personnel. Do not puncture refrigerant tubing. CAUTION - Risk of fire or explosion • Flammable refrigerant used. Consult repair manual/owner’s guide before attempting to service this product. All safety precautions must be followed. • Dispose of properly in accordance with federal or local regulations.
It is important that the appliance be leveled in order to work properly. You may need to make several adjustments to level it. All installations must be in accordance with local plumbing code requirements. Make certain that the pipes are not pinched, kinked or damaged during installation. Check for leaks after connection. Never allow children to operate, play with or crawl inside the appliance. Do not use solvent-based cleaning agents or abrasives on the interior.
INSTALLATION 1. This unit is intended for indoor use only. 2. Electrical Connection a. The unit should be plugged into a 115V±10% 60Hz, grounded wall receptacle. b. Do not plug other electrical units into the same wall receptacle as this unit. c. Do not use an extension cord. d. Compressor warranties are void if the compressor burns out due to low voltage. 3. Check points for selecting location a. The minimum clearance between the back of the cabinet and wall should be at least 7 inches. b.
Remove the bottom grill from the cabinet to clean the condenser coil. It is located behind the grill. Use a soft bristled brush to remove any dirt particles that are on the fins of the condenser coil. After this, use a vacuum cleaner or compressed air to remove the loosened particles. Replace the bottom grill and plug in the unit to outlet. Failure to clean the condenser coil can lead to performance loss and compressor failure. 6.
7. Open Door Alarm 1) If the door is opened, a “door open” warning sign will turn on. 2) If the door remains open for more than 30 seconds, the sound alarm beeps 3 times; if it remains open more than 60 seconds, the sound alarm beeps 5 times and if it remains open more than 5 minutes, the sound alarm will beep continuously. 8. Notice: P-sensor of High temperature alarm or Low temperature alarm may sound at installation depending on the temperature of P-sensor located inside of the cabinets.
dF Forced Defrost Mode SE Temperature Unit Converter mode (℉↔℃) Hi P sensor High temperature alarm setting mode Lo P sensor Low temperature alarm setting mode HL P sensor MAX temperature MIN temperature verification mode 3. CONTROL MODE 1) How to set Cabinet Temperature ① To enter this mode, press [MODE / SET] and [UP or DOWN] until [St] is displayed. ② Then press [MODE / SET] to see current temperature set point.
3) How to Verify Cabinet Temperature ① To enter this mode, press [MODE / SET] and [UP or DOWN] until [th] is displayed. ② Then press [MODE / SET], and you will see current T-sensor temperature after [t-] is displayed, current D-sensor temperature after [d-] is displayed, and current Psensor temperature after [P-] is displayed. These values will be shown for each 1 second in sequence. ③Press [VERIFY] button to return to display cabinet temperature.
9) How to change P-sensor High Alarm setting ① To enter this mode, press [MODE / SET] and [UP or DOWN] until [Hi] is displayed. ② Then press [MODE / SET] to see current high temperature alarm setting. ③ To change the high temperature alarm setting, press [UP or DOWN] until the desired value is displayed, then press [MODE / SET] to set the value. 10) How to change P-sensor Low Alarm setting ① To enter this mode, press [MODE / SET] and [UP or DOWN] until [Lo] is displayed.
TROUBLESHOOTING Problem Compressor will not start Possible Cause Remedy Power connection failure Check power cord and plug it in Power switch is in „off‟ position Move it to „on‟ position Temperature set point is too high Correct temperature set point The door is opened too frequently The unit does not refrigerate well Condensation on cabinet exterior Loading of too much warm or moist product Not enough ventilation Move the unit to a well ventilated place with at least 180mm(7 inches) of clea
SPECIFICATIONS PRODUCT MODELS Solid Full Door Freezers Solid Full Door Refrigerators AFS23ML MLF23S SCFF237 AFS49ML MLF49S SCFF497 ARS23ML MLR23S SCRR232 ARS49ML MLR49S SCRR492 650 ℓ 1,385 ℓ 650 ℓ 1,385 ℓ (23ft3) (49ft3) (23ft3) (49ft3) 695 ㎜ 1,400 ㎜ 695 ㎜ 1,400 ㎜ (27.4 ft3) (55.2 ft3) (27.4 ft3) (55.2 ft3) Capacity Exterior Dimensions (including Casters, Door handles) (W) (D) 838mm (33 ft3) (H) 2,127 ㎜ (83.
PRODUCT Glass Door Refrigerators MODELS ARG23ML MLR23G SCR23SSG ARG49ML MLR49G SCR49SSG 650 ℓ 1,385 ℓ (23ft3) (49ft3) 695 ㎜ 1,400 ㎜ (27.4 ft3) (55.2 ft3”) Capacity Exterior Dimensions (including Casters, Door handles) (W) (D) 838mm (33 ft3) (H) 2,127mm (83.7 ft3) Swing Doors 1 2 Shelves 4 8 Compressor 3/8HP 3/8HP Power Voltage 115V / 60Hz Plug In-Installation NEMA 5-15P Amps 7.5A 7.5A R-290 Refrigerant 70g 90g (2.5oz) (3.
Temperature Set Points and Ranges Model Suggested Set Point Temperature Range FREEZERS AFS23ML, AFS49ML, MLF23S, MLF49S -25°C -30 to -15°C SCFF237, SCFF497 -5°F -10 to 25°F SOLID DOOR REFRIGERATORS ARS23ML, ARS49ML, MLR23S, MLR49S 4°C 2 to 8°C SCRR232, SCRR492 36°F 33 to 41°F GLASS DOOR REFRIGERATORS ARG23ML, ARG49ML, MLR23G, MLR49G 4°C 2 to 8°C SCR23SSG, SCR49SSG 36°F 33 to 41°F 15
LIMITED WARRANTY TWO-YEAR LIMITED WARRANTY Within the 48 contiguous United States, for two years from the date of purchase, when this appliance is operated and maintained according to instructions attached to or furnished with the product, warrantor will pay for factory-specified parts and repair labor to correct defects in materials or workmanship. Service must be provided by a designated service company. Outside the 48 states, all parts are warranted for two years from manufacturing defects.