Manual

4
Technical Information
Models: CM405 & CM405BI (white without lock)
CM411L & CM411LBI (white with lock)
CM421BL & CM421BLBI (black with lock)
Capacity: 4.1 cubic feet
Electrical Input: 115V AC / 60Hz
Rated Current: 1.4A
Power Input: 100W
Refrigerant: R134a, 1.75 oz
Installation: Free-standing (CM405, CM411L, CM421BL)
Built-in (CM405BI, CM411LBI, CM421BLBI)
Unit Weight: 57 lbs
Unit Dimensions: 19⅞"W x 23¼"D x 33¼"H*
* For built-in models (-BI suffix), height can be adjusted from 33¼" to 34½"
* For models with suffix ADA, height is modified to 32” for use under lower counters
Installation Instructions
Before Using Your Refrigerator:
 Remove the exterior and interior packing.
 Check to be sure you have all of the following parts:
 1 drip tray
 1 ice cube tray
 2 wire shelves (models CM405, CM405BI, CM411L & CM411LBI)
 2 glass shelves (models CM421BL & CM421BLBI)
 1 crisper drawer with glass cover
 1 handle with screws and handle seal
 2 keys (except models CM405 and CM405BI)
 Before connecting the unit to the power source, let it stand for approximately 2
hours. This will reduce the possibility of a malfunction in the cooling system from
handling during transportation.
 Clean the interior surface with lukewarm water using a soft cloth.
Installing the Refrigerator
:
 Place your unit on a floor that is strong enough to support the unit when it is fully
loaded. To level your unit, adjust the leveling legs at the bottom.
 Models CM405, CM411L and CM421BL are designed to be free-standing only,
and should not be recessed or built in. On the other hand, models CM405BI,
CM411LBI and CM421BLBI are specifically designed to be built in.
 Models CM405, CM411L and CM421BL: When installing, allow 5 inches of space
at the back and sides of the unit, which will allow the proper air circulation to cool
the compressor and condenser.