User Manual

5
TECHNICAL INFORMATION
Model Numbers
CT66JBI/CT66WBI/AL650WBI (white)
CT66LBI/CT66LWBI/AL650LWBI (white with lock)
CT66BBI/CT66BKBI/AL652BKBI (black exterior)
Capacity
5.1 cu. ft.
Electrical Input
115V AC/60Hz
Rated Current
1.3A
Temperature of
Freezer
5°F
Refrigerant
R134a: CT66JBI, CT66LBI, CT66BBI
R600a: CT66WBI, CT66LWBI, CT66LWBI, CT66BKBI, AL650WBI,
AL650LWBI, AL652BKBI
Installation
Built-in or Freestanding
Ship Weight
102 lbs.
Unit Dimensions
(W x D x H)
23.63" x 23.5" x 33.25"
*Units with suffix "ADA" or prefix "AL" are sized at 32" for use under in ADA compliant applications
NOTE: Specifications are subject to change without notice.
INSTALLATION INSTRUCTIONS
Before Using Your Appliance
• Remove the exterior and interior packing.
• Before connecting the unit to a power source, let it stand for approximately 2 hours. This will
reduce the possibility of a malfunction in the cooling system from handling during transportation.
• Remove the crisper, drip tray and shelves and clean them and the interior surfaces of the unit
with lukewarm water using a soft cloth.
Installing the Refrigerator-Freezer:
•  Place the unit on a floor that is strong enough to support the appliance
when it is fully loaded. To level the unit, adjust the two leveling legs at
the front.
•  These models can be installed either free-standing, recessed or built
into an enclosure. When installing as a free-standing unit, allow at least
2” (51mm) of space at the sides, top and rear of the unit to allow for
proper air circulation to cool the compressor and condenser. Even
when built in, the unit requires at least 2” of clearance at the back, 1/8” (3mm) at both sides and
1/16” (1.6mm) at the top. Take care that the air vents at the front of the appliance are never
covered or blocked in any way.
•  This appliance is supplied with spacers that have to be mounted onto the condenser tube to