FS407L FS408BL BI AccuCold Manual

4
Technical Information
Model
FS407L FS407LBI FS408BL FS408BLBI
Color
White White Black Black
Capacity
2.8 cu. ft. 2.8 cu. ft. 2.8 cu. ft. 2.8 cu. ft.
Electrical Input
115V AC/60Hz 115V AC/60Hz 115V AC/60Hz 115V AC/60Hz
Rated Current
1.6A 1.6A 1.6A 1.6A
Power Input
90W 90W 90W 90W
Refrigerant
R134a, 3.0 oz. R134a, 3.0 oz. R134a, 3.0 oz. R134a, 3.0 oz.
Installation
Free-standing Built-in Free-standing Built-in
Unit Weight
64 lbs. 64 lbs. 64 lbs. 64 lbs.
Unit Dimensions
(W x D x H*)
19⅞" x 23¼" x
33¼"
19⅞" x 23¼" x
33¼" to 34½"
19⅞" x 23¼" x
33¼"
19⅞" x 23¼" x
33¼" to 34½"
*For models with suffix ADA, height is modified to 32” for use under lower counters
Installation Instructions
Before Using Your Freezer
• Remove the exterior and interior packing.
:
• Check to be sure you have all of the following parts: 4 drawers, 1 handle with screws
and handle seal, and 2 keys.
• Before connecting the unit to the power source, let it stand for approximately 2 hours.
This will reduce the possibility of a malfunction in the cooling system from handling
during transportation.
• Remove the drawers and clean them and the interior surfaces of the unit with
lukewarm water using a soft cloth.
Installing the Freezer
• Place your unit on a floor that is strong enough to support the appliance when it is
fully loaded. To level your unit, adjust the leveling legs at the bottom.
:
• Models FS407L and FS408BL are designed to be free-standing only, and should not
be recessed or built in. On the other hand, models FS407LBI and FS408BLBI are
specifically designed to be built-in.
• Models FS407L and FS408BL
•
: When installing, allow at least 4 inches of space at the
back and sides of the unit, which will allow the proper air circulation to cool the
compressor and condenser.
Models FS407LBI and FS408BLBI: These built-in models are designed to be
installed under the counter in a 21-inch opening. When installing, provide the
following clearances to ensure the best operation and proper ventilation: 1/4” on
both sides, 2” at the rear and 1/16” at the top. Be sure that airflow under the
THESE FREEZERS ARE DESIGNED FOR MEDICAL OR PHARMACEUTICAL USE ONLY.
THEY ARE NOT INTENDED FOR USE AS HOUSEHOLD FREEZERS.