accuc ld R by SUMMIT APPLIANCE Models SPRF26 andSPRF26M FELIX STORCH, INC. 770 Garrison Avenue Bronx, NY 10474 Phone: (718) 893-3900 Fax: (844) 478-8799 www.summitappliance.
Thank you for purchasing SUMMIT’s ACCUCOLD® Portable Refrigerator/Freezer. This is an advanced refrigeration unit, combining the latest in compressor and computerized digital control technology. The high efficiency of the compressor will freeze to below 0°F at an ambient temperature of 86°F, and the unit can also be used as a portable refrigerator or cooler. Like all of our ACCUCOLD® line, this unit has been manufactured to very high standards.We fully expect it to bring you many years of excellent service.
WARNING! To reduce the risk of fire, electric shock or injury when using your appliance, follow these basic precautions: cooler upright when it is turned on and while in use. •··Keep turn on the cooler with wet hands or when your feet are in con• Never tact with water. connected to a DC power source (for example, a cigarette lighter •·Ifsocket) in a vehicle, do not attempt to power up the cooler when vehicle engine is not turned on. ·Always be sure the correct voltage and current are applied to the cooler.
Before calling for assistance or service, please check this Troubleshooting section. It may save you the cost of a service call. If you still need help, follow the instructions below. This cooler is the ideal choice if you wish to refrigerate medical supplies . It allows precise control of temperature , and the " M " versions come with a lock and a trolley for easy transporting .
Location of Parts (Model SPRF26/SPRF36) When storing your cooler, we recommend that you leave the lid open slightly. This will help keep mold from forming and prevent stale odors. It’s a good idea to follow the cleaning procedure (below) before storing your cooler.
1. Plug the DC/DC power cord into the cord socket on the side of the unit (see upper figure on page 5). 3 2. If using a DC power source such as the cigarette lighter socket of a vehicle, plug the other end of the cord into the power source. 3.If using an AC power source, connect the AC/DC adapter to the end of the DC/DC cord, then plug the adapter into a wall socket or other AC power source. 4.Press the power switch to turn on the cooler. (You will hear the sound of the compressor starting.) 1.
