Thermometer Instructions

R001-11232021

Programming the Alarm

By default, the high and low alarm settings are 8

C and 2

C respectively. To reset high alarm and low

alarm temperature settings, follow instructions below.

This is the high temperature limit. The current temperature is considered out-of-range if the probe

reads a temperature equal to or above the high temperature limit.

Press once to enter the high temperature alarm setting mode. HI-SET will display on the LCD

screen. Press ▲ or ▼ to increase or decrease the value. Then, press the HIGH ALARM button

to confirm. The LCD screen will return to the current temperature.

This is the low temperature limit. The current temperature is considered out-of-range if the probe

reads a temperature equal to or below the low temperature limit.

Press once to enter the low temperature alarm setting mode. LO-SET will display on the LCD

screen. Press ▲ or ▼ to increase or decrease the value. Then press the LOW ALARM button

to confirm. The LCD screen will return to the current temperature.

Eliminating the Alarm Indicators

When an alarm condition occurs LO-ALARM/HI-ALARM icons will appear on the display along with a

beeping sound to alert user. Press any key ONCE to stop the beeping sound. The beeping sound lasts for

60 seconds, but the high and low indicators will remain on display even when the unit gets back in range.

Pressing any key will silence the beeping sound, but it will be reactivated every 30 minutes if the alarm

event still exists.

Press the and keys simultaneously to clear the LO-ALARM/HI-ALARM indicators. The

alarm will not clear if the alarm event still exists.

Using the Alarm

• Placement: Once the thermometer has been programmed, place the temperature sensor (in glycol

bottle) in the location to be monitored, such as inside the refrigerator or freezer. Attach the

thermometer to the door of the unit using its magnet.

• If the temperature measurement rises above or falls below the set temperature range, the alarm will

sound. To silence the alarm, press any key ONCE.

• The alarm/thermometer’s maximum and minimum readings reflect the highest and lowest

temperatures since the battery was inserted or since the RESET button was last pressed.

By default, ALARM feature is activated. To turn it OFF follow the instructions below:

Long press for 2 seconds to turn the alarm feature ON/OFF.

PLEASE NOTE! When the alarm feature is turned OFF, both the visual and audible alarms are

turned OFF and the user will NOT be notified of any high or low alarm violations.

When alarm is ON, the alarm icon will be displayed and the user can receive visual and

audible alarm notifications.

Set the high and low alarm temperature limits above and below the refrigerator/freezer operating

temperature to prevent false alarms. Refrigerators are designed to run between 2-8 °C (36-46 °F)

while freezers run below -15 °C (5 °F).