English User Manual User Manual IQ216 Please read the manual carefully before using this charger. We thank you that you have decided to purchase our intelligent charger. Please follow the safety and care instructions in this manual, to be able to use this device efficiently and safely.
English User Manual Important Notes: • Use the IQ216 charger only with rechargeable NiCd, NiMH cells. NiMH/NiCd: AAA / Micro, AA / Mignon, 9V E-Block • Do not use the charger with other types of batteries (for example: Alkaline or other Systems). • Use the charger only in dry and closed rooms with normal conditions. • If the charger is not in use, we recommend disconnecting the power cable from the socket. • During the charging process, you should not leave the charger unattended.
English User Manual Input: DC 12V / 2,0A Min. / ca. 24W Min. Output: Sixteen independent slots Approx. 1.49V / AA 1000 or 500mA Max. / AAA 500mA Max., 9V 30mA Max.
English User Manual Figure 3: LCD after turning the charger on with no inserted batteries Charging function: The IQ216 has 16 independently monitored charging slots, where every four slots are sharing their power. The display shows which slots belongs together. For this, every four battery symbols on the display are coupled by a bar above that also shows if the slots are charging or discharging. The discharge function is available only for the last four slots (13, 14, 15 and 16).
English User Manual For the benefit of lifetime of the smaller AAA batteries, the charging current, set by the charger, is reduced to 500mA (max.) and is as high as the lowered current for AA batteries. Regardless of the used number of slots, the charging current is always 500mA (max.) for AAA batteries. The procedure of inserting the battery to recognition of the actual state of charge works the same as for the AA batteries. So please take a look in the above subsection.
English User Manual The IQ216 charger also features a discharge function that is available on the last four slots (slot 13, 14, 15 and 16). For using this function, simply insert the batteries into the slots and double press the “MODE” button. INFORMATION: If you want to know if the four slots are charging or discharging, then take a look at the according battery symbols on the display. If the state-of-charge bars are running downwards, then the four slots are discharging.
English User Manual With the help of the “MODE” button you can choose different functions by a: Short Single Press: If you press the “MODE” button once for a short time, you active the LCD backlight. To save energy, the backlight stays on for approximately 30s and turns off automatically afterwards. Long Single Press: By pressing and holding the button down for about 4s you can also turn on the LCD backlight. But this time it stays on permanently.
English User Manual The chargers are maintenance free but should be cleaned sometimes. The charger should be disconnected from the power supply before cleaning. Use only soft and dry tissues (like cotton textiles) do not use any liquid. Disclaimer: • The manufacturer and supplier are not responsible for incorrect or improper use and the resulting consequences. • Any repair or modification that is not performed by the original supplier will void the warranty.
English User Manual TECHNICAL SPECIFICATIONS IQ216 Display Backlight Controls AC Input: 100-240V (for AC Power supply); DC Input: 12V (11-14V) / 2A Min. LC display live view with backlight: Shows the charge status, charge current. Bat. Full, discharge mode Size: 150mm * 19mm Yes One Button „easy to use“ function (easy handling). Operating Modes Charge, Discharge Charge Method Delta-peak Sensitivity for NiMH / NiCd Safety Temp. Control Charge Cutoff Max.