User's Manual

23
AT308 - USER MANUAL
6.2 MAGAZINE STRIPPING AND REASSEMBLY
STRIPPING:
 Press down and push forward on the rear of the magazine platform.
 Hold the front of the magazine platform/spring assembly with the other hand and twist
the platform clockwise through approximately 45 degrees as illustrated below.
 Keeping the magazine platform/spring assembly twisted, pull the platform forward until it
clears the magazine lips.
 Remove the magazine platform/spring assembly from the magazine body.
 The magazine spring is riveted to the platform and it is not recommended that they are
separated for any maintenance activities.
REASSEMBLY
 Hold the front of the platform and insert the assembly into the magazine body ensuring
that the bottom fold of the spring lays flat on the bottom of the magazine.
 Twist the platform clockwise by approximately 45 degrees and slide the platform
rearwards into the magazine body.
 Press the platform fully into the magazine body and release several times to ensure that
the platform spring/assembly moves correctly and freely.
Push
Pull
Lift
Twist
Pull
Platform assembly
Body