Specifications

16
1616
16
DigiPump
DigiPump DigiPump
DigiPump SR7x
SR7xSR7x
SR7x Sy
Sy Sy
Syringe Pump
ringe Pump ringe Pump
ringe Pump Operator
OperatorOperator
Operator’s
ss
s Manual
Manual Manual
Manual
5. Alarms
5.1 Alarms and Actions
Description
Display
Reason
Solution
NEAR
alarm
The syringe is
almost empty and
close to end of
infusion
1.press the knob to cancel
the alarm(the alarm will
ring again after two
minutes)
2. Press STOP key to stop
the syringe pump and
cancel the alarm.
OVER
alarm
The syringe is
empty and
infusion is
finished
1. Press the knob to cancel
the alarm(the alarm will
ring again after two
minutes)
2. Press STOP key to stop
the syringe pump and
cancel the alarm.
Occlusion
alarm
1. Syringe or
infusion set
with occlusion
2. Occlusion
alarm need
sensitivity
adjustment
3. Syringe pump
pressure sensor
has problem
1 ：Press STOP key to
stop the syringe pump and
cancel the alarm, eliminate
infusion occlusion, then
press the START key to
start infusion once again.
No.2： Refer to Occlusion
Sensibility Adjust 3.3
No.3 ： Contact Digicare
Technical support
Low
battery
1．Battery too low
2．Bad battery
aging or
something
wrong with
the battery
charge circuit
No.1 ： Connect to AC
power supply to charge the
battery
No.2 ： Contact Digicare
Technical Support
AC
indicator is
OFF
1．No AC power
supply for the
syringe pump.
2．Something
wrong with
the power
supply circuit
of syringe
pump.
No.1：Check if the power
cord is not plugged in or
not properly plugged in.
No.2 ： Contact Digicare
Technical Support