Troubleshooting guide

RightOnScales - UltraShip Manual - Digital Scales & Pocket Scales! Electronic Scales Digital Scale
HOLD FUNCTION
Once the hold key is pressed, the weight will remain on the display for 120 seconds after the item has been
removed from the scale so the weight can easily be read.
1) Place the item on the scale's platform.
2) Wait for the stable weight to be displayed.
3) Press the hold key. The -.- hold indicator will turn-on.
4) Remove the item from the scale platform. The item's weight reading will remain on the display for 120
seconds.
5) Quit the hold function: Once an item is weighed and the hold function is enabled; you may want to end the
hold function, Press the hold key again to cancel the -.- hold indicator and return the scale to normal weighing
mode.
AUTO-OFF FUNCTION SETTINGS
To enable or disable the auto-off feature follow these directions:
1. Start with the power off (the power must be OFF). Press and hold the [Hold]
key first, then press [ON/OFF], then release both keys. The display will show
A_ON or A_OFF.
2.Selection of auto shut off mode.
Press the [Hold] key, the display will show A_ON or A_OFF. A_ON means the auto shut off function is active.
Press [Hold] again, the display will show A_OFF, this means the auto shut off function is inactive.
3.Return to weighing mode.
Press [ON/OFF] to turn the power off, press [ON/OFF] again to turn on the power and the scale will return
to weighing mode.
WEIGHING
Before weighing
Whenever possible, please allow the scale to warm up for several seconds after first turning the power on so that
http://www.rightonscales.com/web/manuals/ultra-manual.htm (6 of 8)7/30/2006 8:21:19 PM