User manual

Accurate Technology DigiScale Models 18 & 28 User Manual Page 13 of 36
Frequently Asked Questions
Can I mount the Scale/Encoder without the connector link/guide clip?
Yes. However, the connector link and guide clip serve to provide an
accurate method of transferring the movement of the encoder or
scale, while also absorbing any stresses that may occur. If they are
not used, your system could be damaged and the warranty could
be voided.
What does no Enc
no Encno Enc
no Enc mean?
If the encoder is off the scale, or unplugged from the readout,
a no Enc
no Encno Enc
no Enc will appear on the readout. To clear the error:
1. Be sure the encoder is on the scale.
2. Plug the encoder into the readout.
3. Unplug the encoder from the readout for one second then
reconnect it.
How do I calibrate my DigiScale?
There is no calibration available or necessary for the DigiScale.
System accuracy will depend on the accuracy of the DigiScale Scale
itself and the quality of the installation.