User`s manual

ProScale M150, M250 and all products with General Purpose LCD Digital Displays 21 of 44
S ECTION 4 D IGITAL D ISPLAY O PERATION
This section covers the installation, programming and operation of the General Purpose
LCD Digital Display (Firmware V2.0 and higher). This display is supplied on ProScale
Model 150 and Model 250 systems (covered in this manual) as well as several other
ProScale products whose operation is covered in their respective manuals but the digital
display information is contained here.
If your ProScale product has a digital display other than a General Purpose LCD Digital
Display, please refer to the separate manual for that individual display.
General Purpose LCD Digital Displays come in several configurations.
The major differences are described below:
Surface Mount Displays
Basic Fully Programmable Fully Programmable
2AA Batteries 2AA Batteries 24VDC
SPC output SPC output Limit/Mon. Signal Output
LCD Backlighting
P/N 701-1600-120 P/N 701-1600-100 P/N 701-1605-100
NEW P/N 700-1600-220 P/N 700-1600-200 P/N 700-1600-205
(New Part numbers effective April 1, 2004)
Basic Display
This display operates on 2AA batteries. It is ideal for machinery applications where more
advanced programming features are not desired or required. Functions such as switching
between ABSolute and INCremental readings, SENDing data, MONitoring drift, HOLDing
a reading and Special Function keys are not available. This display does not have Signal
output, Back-Lighting, or special function capability.
Programming Parameters Pr0 - Pr8 and Pr16 & 17 are applicable to the BASIC display.