User`s manual

ProScale M150, M250 and all products with General Purpose LCD Digital Displays 37 of 44
Programming Summary
Programming Factory Works with Digital Display:
Parameter Function Default Basic 2AA 2D 24VDC
Pr0 Encoder Direction 0    
Pr1 Segment Offset 1 - On    
Pr2 High Speed ReadHead 0 - Off    
Pr3 Zero, Offset Entry 1 - Enable    
Pr4 Display Resolution 1 - Normal    
Pr5 mm or cm 0 - mm    
Pr6 Fractions, mm, in 0 - all    
Pr7 Scaling 1.000 (none)    
Pr8 Auto off 15 - 15 min.    
Pr9 Auxiliary Keypad 7 - all keys   
Pr10 Offset Addition 0 - disabled   
Pr11 Offset Addition 1 1.000 Inch   
Pr12 Offset Addition 2 1.500 Inch   
Pr13 Offset Addition 3 2.000 Inch   
Pr14 Output Mode 0 - drift 
Pr15 Output Polarity 0 - N/O 
Pr16 Lower Limit 0.000    
Pr17 Upper Limit 5.000 Inch    
Pr18 Drift Tolerance .01 Inch   
Pr19 Auto Monitor ON 0 - disabled   
Pr20 Auto Monitor OFF 0 - disabled   
Pr21 Auto Monitor Distance .500 Inch   
Pr22 Backlight On 1 - 3 seconds 
Pr23 FUTURE FEATURE 1
Pr24 FUTURE FEATURE 0
Pr25 FUTURE FEATURE 0