Installation manual

Operation Manual for LCD Digital Readouts Page 28 of 48
4. View Accumulated Total.
To view the accumulated total, press the F4 key.
The following options are now available:
a. Press F3 to clear the total and return to the measuring mode.
b. Press F4 (DOES NOT clear the accumulation total) to return to the
measuring mode.
c. Press SEND to transmit the accumulated total to the SPC port.
NOTE: Measurement Accumulation mode maintains a running summation of
the measurements taken. Individual measurements in the summation series
cannot be edited or deleted. If an error is made and an incorrect measurement
is taken, the entire summation must be cleared and completed again. No
rounding of inches or millimeters occurs when configured for feet/inches or
meters/millimeters.